glock external safety

Glock External Safety - The Tactical Safety System for the Glock Pistol (TSSG) will fit all GLOCK models with "25.5 mm | 1.0 inch SHIELD WIDTH"

SKU: Tactical Safety System for Glock Categories: BHVeterans Only, Glock, Glock Optimization, Other Manufacturers, Tactical / Night Ops

Glock External Safety

Description      *Drop-in equipment, and easy to learn system* *Positive Trigger Lock-Out* *Triggerless alternative take-down* *Improved Quick/Child Easy Lockout*

What You Need To Know About The Handguns Canadian Police Carry

Assembly on gen.5 will require filing the frame plastic piece shown in one of the product pictures

If a backstrap is used, please ensure that there is no contact between the TSSG and the backstrap. To achieve this, a very small amount of the back strap may need to be cut.

The Tactical Safety System for Glock Pistols, by RDIH, must ONLY be installed on "stock" Glock Pistols. SPECIFICALLY, THE MOUNTED MANUAL SAFETY MUST NOT BE ADDED TO ANY GLOCK PISTOL WHERE THE "CONNECTOR" OR ANY PART OF THE FIRING MECHANISM IS TO BE DELETED.

PERSONS INSTALLING THE MANUAL MOUNTED SAFETY DEVICE ARE SOLELY RESPONSIBLE FOR TESTING THE FUNCTION OF THE MOUNTED SAFETY DEVICE BEFORE EACH AMMUNITION IS INSERTED INTO THE FIREARMS.

Setting Up A Glock For Concealed Carry

THE FOLLOWING INSTALLATION AND SAFETY TEST PROTOCOL IS INTENDED FOR WEAPONS, PISTOLS, AND PERSONS KNOWLEDGE OF ALL FUNCTIONS OF THE GLOCK PISTOL AND QUALIFIED TO INSTALL THE MANUAL DEVICE OF SECURITY.

ANY TEST RESULT THAT DOES NOT MEET THE EXPECTATIONS DETAILED IN STEPS 8 - 11 ABOVE, INCLUDING BUT NOT LIMITED TO: "STRIKER CONTINUES AS A RESULT OF TRIGGER PULL WITH DEVICE IN POSITION IS DELETED", REQUIRED -PISTOL AND ORIGINAL BACK -PLATE replaced. IT IS PROBABLY THAT THIS GLOCK PISTOL HAS BEEN DILLED AND/OR THE CONNECTOR, OR OTHER NON-OEM INTERNAL PART AND TSSG SHOULD NOT BE USED FOR THE PISTOL YOU HAVE BEEN CURSED BY WEAPONS, PISTOLSMITHER,.

IT IS THE RESPONSIBILITY OF THE USER OF THIS PRODUCT TO TEST ALL ASPECTS OF ITS WEAPON'S FUNCTION, WITH APPROPRIATE FREQUENCY, AND TO ENSURE THAT THE FIREARM IS MAINTENANCED ANNUALLY AND PERIODICALLY INSPECTED, PERIODICALLY INSPECTED.

IT IS THE USER'S RESPONSIBILITY TO FOLLOW ALL FIREARMS HANDLING PRACTICES AND FOLLOW THE TEST PROTOCOL INSTRUCTIONS DESCRIBED HEREIN. AND WITH THE EXCEPTION OF PERFORMING THIS TEST PROTOCOL:

Instruction Manual For All Glock Models With Envelope And Inserts

NEVER HAVE YOUR FINGER ON THE TRIGGER OF ANY FIREARM WHEN YOU ARE READY TO SHOOT THE WEAPON.

FOR ALL PURPOSES FOLLOWING THE SAFETY TEST PROTOCOL DESCRIBED HEREIN, OR FOR PRACTICE PURPOSES (DRY-FIRING), ALWAYS IMPLEMENT ALL SAFETY PRECAUTIONS AND ONLY IN A CONTROLLED ENVIRONMENT. OR NOT HAVING YOUR FINGER ON THE TRIGGER OF ANY FIREARM, EVER, FOR ANY REASON, CAUSES YOU TO FIRE THE WEAPON.

NEITHER RDIH, LLC, NOR ITS OFFICERS, EMPLOYEES, OR AFFILIATES, REPRESENT OR WARRANT THAT "Accidental Discharges" DO NOT, OR CAN, OCCUR WHEN USING THE Tactical Safety System For Glock Pistols. Using the Tactical Safety System for Glock (TSSG) adds a margin of safety/security to the Glock design in the event of human error - but it does not and cannot protect against all human error, nor the safety margins cannot protect against the possibility of Unintended Separation. due to mechanical failure or lack of adequate maintenance including periodic service and evaluation of a firearm by a qualified Gunsmith or Pistolsmith. Any time a round of ammunition is placed in the barrel of any firearm, the possibility of an accidental discharge is greatly increased.

Please read our Terms of Use, Privacy Policy and GDPR Terms before ordering products and using LLC resources

Glock 46: The First Rotating Barrel Glock Under Test

You are viewing: Manual Safety for Glock - Tactical Safety System for Glock by RDIH $99.95 $66.61 Just to get it out of the way, for all you Glock fanboys who think this is a DIY shrine, I understand your following comments :

Now moving on...I have a few Glocks. Two of them are Glock 19s. One is a Gen 2 and the other is a Gen 4. So a week ago, after surfing the net for gun related toys, I came across this…

Instructions should be read before installation. This is the way I did it. So proceed at your own risk.

Now using a micrometer, measure 2.173 inches from the center of the trigger pin to the rear of the rifle and this will mark the front edge of the notch you will make in the body of the rifle where it will be closed manual safety.

Do Glocks Have Safeties? [2022]

The notch you make should be 0.093 inch in width and 0.4 inch in depth and should be made in the direction of the pin hole of the trigger pin housing behind the grip. I used a handheld hack that cuts in the pull motion. It gave me the best control. Then use a needle file to smooth the notch.

Before we install the new trigger mechanism housing into the rifle, let's go over how to put the kit together...

The photo below is just for reference, but you need to install the small metal parts in the new trigger mechanism box while it is partially inserted into the lower one, just enough to install the -small metal parts.

Make sure the trigger bar cross fits into the trigger bar guide of the kit.

Saf T Blok Post '98

Then reinstall slide and function test mechanism. Here's the after image with another toy in the background.

I installed a safety on my Glock 27 a few years ago and those were the exact comments I got when I showed it on this site.

My gun and my preference. It has been working flawlessly all this time. I have never trusted a Glock for a concealed carry weapon as I usually carry a Sig 229 or a Colt pocket 9.

LI Ammo said: I wasn't planning on doing it until I saw it came with a German convertible. Click to expand... It's actually an Italian convertible... Same shit.

Why The Fbi And Police Prefer The Glock 23 To The Glock 19

I definitely trust the reliability of stock Glocks on the Italian auto, but for those who feel more comfortable with a manual safety, be sure to train like hell with it!

Steyr AUG man said: anything can go wrong when you draw against an opponent who threatens to shoot you or your people Click to expand... When I carry my 1911 sweeper safety is a natural part of the lottery. So you have to learn to throw your safety on your Glockenspiel.

Nordon said: He does not wish to change the framework anyway. Click to expand... And if you don't get it right, or maybe after a hundred cycles, it will change and block when you need it most. The frame is not fixed where it is cut. An unirradiated cut may develop a crack or hairline fracture that may go undetected, or it may occur after you fire your first round in self-defense, leaving you with a bludgeon in your hand.

Got a 70 colt series talent, went to use it in a match and the damn thing wouldn't stop until I realized the thumb safety was on...

Days Of Guns: Glock 19 Carry

I never ever carry a semi with that kind of security as if I ever needed it and the stress level was high I probably would have forgotten.

You should see a playback of security cameras of people who have to sign there carrying a weapon and at the moment you forget to sweep the security off. It doesn't end well. Do as you like, but remember to keep it simple. If you don't trust the gun as designed, don't carry it. I carry an attachment and never feel like my gun will magically fire without pulling the trigger.

Also know that your weapon has been modified into something that a lawyer can use against you if God forbid someone else is forced to use your gun. Glock won't help for sure.

Tom Mac said: Never ever carry a semi with that kind of security as if I ever needed it and the stress level was high I'd probably forget. Click to expand... Absolutely. that's why most police guns don't have a safety on them. If you are worried about pulling the trigger on a self defense weapon when you don't have to, you probably shouldn't carry a gun.

Do I Need A Safety On My Everyday Carry Handgun? » Concealed Carry Inc

In the woods, when you go to shoot a deer, and it takes those extra seconds needed for your brain to register the inability to pull the trigger, that means the safety is on, maybe the heart away, no big deal.

But on the subway stairs, when an ATM, or a church when an ISIS man walks in and starts shooting at your line, what happens when you sign and hear a "click" instead of a "boom"?

Also, since many holsters are molded, and most of them have no indentation, what if putting them in the holster changes the condition of the safety?

Anythinggood said: Also know that your weapon has been turned into a can that a lawyer can use against you if god forbid someone is forced to use your gun. Glock won't help for sure.

Gun Myth Or Reality: Why Some Gun Owners Hate Glock (the Trigger?)

External safety audit, glock no safety, safety glock, glock safety plunger polish, glock safety lock, external safety, glock drop safety, glock with external safety, best glock safety plunger, glock safety switch, glock 42 safety, glock thumb safety